Robot2025/Actionneurs/Actionneurs.ino

#include <SCServo.h>
#include "Ascenseur.h"

#define SERVO_FOUCHE 5
#define SERVO_PINCE_GAUCHE 8
#define SERVO_PINCE_DROITE 9

#define FOURCHE_TRANSPORT 5, 307
#define FOURCHE_LEVEE     5, 227
#define FOURCHE_PRISE     5, 345

#define DOIGT_PINCE_GAUCHE_FERME 2080
#define DOIGT_PINCE_GAUCHE_OUVRE 2367
#define DOIGT_PINCE_GAUCHE_PARKING 1550

#define ID_FEETECH_ASC_G 11
#define ID_FEETECH_ASC_D 10

SMS_STS sms_sts;

int ID_Feetech = 4;

struct position_t{
  int nb_tour;
  uint position;
} cible_haute, cible_basse, actuelle;

enum etat_action_t{
  ACTION_EN_COURS,
  ACTION_TERMINEE,
  ACTION_ECHEC
};


/// @brief pilote la vitesse des moteurs
/// @param vitesse vitesse signée, sera saturée à 255
void Moteur_set(int vitesse){
  ledcWrite(3, 0);
  ledcWrite(4, 0);
  if(vitesse < 0){
    vitesse = -vitesse;
    if(vitesse > 255){
      vitesse = 255;
    }
    ledcWrite(3, vitesse);
  }else{
    if(vitesse > 255){
      vitesse = 255;
    }
    ledcWrite(4, vitesse);
  }
}

void Translateur_avance(){
  Moteur_set(128);
}

void Translateur_recule(){
  Moteur_set(-128);
}

void setup()
{
  Serial.begin(115200);//sms舵机波特率115200
  Serial1.begin(1000000,SERIAL_8N1, RX, TX);//sts舵机波特率1000000
  sms_sts.pSerial = &Serial1;
  delay(1000);
  
  cible_haute.nb_tour = 0;
  cible_haute.position = 500;

  cible_basse.nb_tour = 2;
  cible_basse.position = 1500;

  actuelle.nb_tour = 0;

  //Servo fourche (12V)
  ledcAttach(5, 50, 12);
  // ledcWrite(5, 307); // Neutre
  ledcWrite(5, 307); // Position de transport
  //ledcWrite(5, 227); // Position levée (butée haute)
  //ledcWrite(5, 345); // Position de prise

/*
  while(1){
    ledcWrite(FOURCHE_PRISE);
    delay(1000);
    ledcWrite(FOURCHE_TRANSPORT);
    delay(1000);
    ledcWrite(FOURCHE_LEVEE);
    delay(1000);
    ledcWrite(FOURCHE_TRANSPORT);
    delay(5000);

  }*/


  // Servo pinces à aimant
  ledcAttach(8, 50, 12);
  ledcWrite(8, 307);

  ledcAttach(9, 50, 12);
  ledcWrite(9, 307);

  // Moteur
  ledcAttach(3, 500, 8);
  ledcWrite(3, 0);
  ledcAttach(4, 500, 8);
  ledcWrite(4, 0);

  /*while(1){

    ledcWrite(FOURCHE_PRISE);
    delay(1000);
    ledcWrite(FOURCHE_TRANSPORT);
    delay(1000);
    ledcWrite(FOURCHE_LEVEE);
    delay(1000);
    ledcWrite(FOURCHE_TRANSPORT);
    delay(1000);

    sms_sts.WritePosEx(3, DOIGT_PINCE_GAUCHE_PARKING, 2400, 50);
    delay(1000);
    sms_sts.WritePosEx(3, DOIGT_PINCE_GAUCHE_OUVRE, 2400, 50);
    delay(3000);
    sms_sts.WritePosEx(3, DOIGT_PINCE_GAUCHE_FERME, 2400, 50);
    delay(5000);
    sms_sts.WritePosEx(3, DOIGT_PINCE_GAUCHE_OUVRE, 2400, 50);
    delay(5000);

  }*/


  if(sms_sts.FeedBack(ID_Feetech)!=-1){
    actuelle.position = sms_sts.ReadPos(-1);
  }else{
    do{
      Serial.println("Erreur lecture");
      delay(1000);
    }while(sms_sts.FeedBack(ID_Feetech) ==-1);
    actuelle.position = sms_sts.ReadPos(-1);
  }

  Ascenseur_init();

  while(1){
    Ascenseur_gestion();
  }

  
}


void loop()
{
  static int m_pos=0;
  static unsigned long myTime=0;
  static position_t cible;

  
  Serial.print(">millis:");
  Serial.println(millis());
  if(millis() > myTime + 4000){
    myTime = millis();
    
  }

  int ID = sms_sts.Ping(ID_Feetech);
  if(ID!=-1){
    Serial.print("Servo ID:");
    Serial.println(ID, DEC);
    delay(100);
  }else{
    Serial.println("Ping servo ID error!");
    delay(2000);
  }

    int Pos;
  int Speed;
  int Load;
  int Voltage;
  int Temper;
  int Move;
  int Current;
  if(sms_sts.FeedBack(ID)!=-1){
    Pos = sms_sts.ReadPos(-1);
    Speed = sms_sts.ReadSpeed(-1);
    Load = sms_sts.ReadLoad(-1);
    Voltage = sms_sts.ReadVoltage(-1);
    Temper = sms_sts.ReadTemper(-1);
    Move = sms_sts.ReadMove(-1);
    Current = sms_sts.ReadCurrent(-1);
    Serial.print(">Position:");
    Serial.println(Pos);
    Serial.print(">Speed:");
    Serial.println(Speed);
    Serial.print(">Load:");
    Serial.println(Load);
    Serial.print(">Voltage:");
    Serial.println(Voltage);
    Serial.print(">Temper:");
    Serial.println(Temper);
    Serial.print(">Move:");
    Serial.println(Move);
    Serial.print(">Current:");
    Serial.println(Current);
    delay(50);
  }else{
    Serial.println("FeedBack err");
    delay(500);
  }
}