Ajout de la communication et envoi des valeurs des joystick et boutons par i2c

CMakeLists.txt

@@ -12,15 +12,18 @@ pico_sdk_init()
 
 add_executable(Mon_Projet
   main.c
+  i2c_maitre.c
+  i2c_slave.c
+  communication.c
 )
 
 target_include_directories(Mon_Projet PRIVATE Mon_Projet_ULD_API/inc/)
 
 target_link_libraries(Mon_Projet
   hardware_i2c 
-  hardware_uart 
+  hardware_adc 
   hardware_pwm
-  hardware_adc
+  hardware_uart 
   pico_stdlib
   pico_multicore
 )

communication.c

@@ -0,0 +1,107 @@
+/*****
+ * 
+ * Le principe est que la télécommande soit l'esclave I2C
+ * Pour envoyer un message, on charge le message à l'adresse 0 de la "mémoire" pour l'i2c
+ * 
+ * Pour lire le message, le robot interroge la télécommande, et demande le contenu à partir de l'adresse 0 de la mémoire.
+ * Ainsi, en cas d'échec de la communication, le robot détectera une manette débranchée.
+ * Par défaut, la fonction lit 255 caractères.
+ * 
+ * Copyright (c) 2024 - Club robotique de Riom
+ * 
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+*/
+#include "i2c_fifo.h"
+#include "i2c_slave.h"
+#include "i2c_maitre.h"
+#include "string.h"
+
+
+/// DEBUT DE LA CONFIGURATION de L'I2C
+
+#define I2C0_SDA_PIN 16
+#define I2C0_SCL_PIN 17
+
+#define I2C_SLAVE_ADDRESS 0x17
+
+static const uint I2C_SLAVE_SDA_PIN = I2C0_SDA_PIN; 
+static const uint I2C_SLAVE_SCL_PIN = I2C0_SCL_PIN;
+
+// The slave implements a 256 byte memory. To write a series of bytes, the master first
+// writes the memory address, followed by the data. The address is automatically incremented
+// for each byte transferred, looping back to 0 upon reaching the end. Reading is done
+// sequentially from the current memory address.
+static struct
+{
+    uint8_t mem[256];
+    uint8_t mem_address;
+    bool mem_address_written;
+} context;
+
+// Our handler is called from the I2C ISR, so it must complete quickly. Blocking calls /
+// printing to stdio may interfere with interrupt handling.
+static void i2c_slave_handler(i2c_inst_t *i2c, i2c_slave_event_t event) {
+    switch (event) {
+    case I2C_SLAVE_RECEIVE: // master has written some data
+        if (!context.mem_address_written) {
+            // writes always start with the memory address
+            context.mem_address = i2c_read_byte(i2c);
+            context.mem_address_written = true;
+        } else {
+            // save into memory
+            context.mem[context.mem_address] = i2c_read_byte(i2c);
+            context.mem_address++;
+        }
+        break;
+    case I2C_SLAVE_REQUEST: // master is requesting data
+        // load from memory
+        i2c_write_byte(i2c, context.mem[context.mem_address]);
+        context.mem_address++;
+        break;
+    case I2C_SLAVE_FINISH: // master has signalled Stop / Restart
+        context.mem_address_written = false;
+        break;
+    default:
+        break;
+    }
+}
+
+void i2c_set_slave_mode_perso(i2c_inst_t *i2c, uint8_t addr) {
+    i2c->hw->enable = 0;
+    
+    //while( !(i2c->hw->enable_status & 0x1) );
+    
+    i2c->hw->sar = addr;
+    i2c->hw->con = 0;
+    
+    i2c->hw->enable = 1;
+}
+
+static void setup_slave() {
+    gpio_init(I2C_SLAVE_SDA_PIN);
+    gpio_set_function(I2C_SLAVE_SDA_PIN, GPIO_FUNC_I2C);
+    gpio_pull_up(I2C_SLAVE_SDA_PIN);
+
+    gpio_init(I2C_SLAVE_SCL_PIN);
+    gpio_set_function(I2C_SLAVE_SCL_PIN, GPIO_FUNC_I2C);
+    gpio_pull_up(I2C_SLAVE_SCL_PIN);
+
+    i2c_slave_init(i2c0, I2C_SLAVE_ADDRESS, &i2c_slave_handler);
+}
+/// FIN DE LA CONFIGURATION de L'I2C
+
+
+void communication_init(void){
+    setup_slave();
+    i2c_maitre_init();
+}
+
+void communication_envoyer_message(unsigned char * message, unsigned int message_length){
+    memcpy(context.mem, message, message_length);
+}
+
+int communication_lire_message(unsigned char * message){
+    i2c_lire_registre(I2C_SLAVE_ADDRESS, 0, message, 255);
+
+}

communication.h

@@ -0,0 +1,5 @@
+#include "i2c_maitre.h"
+
+void communication_init(void);
+void communication_envoyer_message(unsigned char * message, unsigned int message_length);
+enum i2c_resultat_t communication_lire_message(unsigned char * message);

i2c_fifo.h

@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2021 Valentin Milea <valentin.milea@gmail.com>
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#ifndef _I2C_FIFO_H_
+#define _I2C_FIFO_H_
+
+#include <hardware/i2c.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \file i2c_fifo.h
+ *
+ * \brief I2C non-blocking r/w.
+ */
+
+/**
+ * \brief Pop a byte from I2C Rx FIFO.
+ * 
+ * This function is non-blocking and assumes the Rx FIFO isn't empty.
+ * 
+ * \param i2c I2C instance.
+ * \return uint8_t Byte value.
+ */
+static inline uint8_t i2c_read_byte(i2c_inst_t *i2c) {
+    i2c_hw_t *hw = i2c_get_hw(i2c);
+    assert(hw->status & I2C_IC_STATUS_RFNE_BITS); // Rx FIFO must not be empty
+    return (uint8_t)hw->data_cmd;
+}
+
+/**
+ * \brief Push a byte into I2C Tx FIFO.
+ * 
+ * This function is non-blocking and assumes the Tx FIFO isn't full.
+ * 
+ * \param i2c I2C instance.
+ * \param value Byte value.
+ */
+static inline void i2c_write_byte(i2c_inst_t *i2c, uint8_t value) {
+    i2c_hw_t *hw = i2c_get_hw(i2c);
+    assert(hw->status & I2C_IC_STATUS_TFNF_BITS); // Tx FIFO must not be full
+    hw->data_cmd = value;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // _I2C_FIFO_H_

i2c_maitre.c

@@ -0,0 +1,281 @@
+#include "i2c_maitre.h"
+#include "hardware/gpio.h"
+#include "hardware/i2c.h"
+#include "pico/stdlib.h"
+#include <stdio.h>
+
+#define I2C1_SDA_PIN 18
+#define I2C1_SCL_PIN 19
+
+#define I2C_NB_MAX_TAMPON 20
+
+enum i2c_statu_t{
+    I2C_STATU_LIBRE,
+    I2C_STATU_OCCUPE
+} i2c_statu_i2c1;
+
+uint16_t I2C_tampon_envoi[I2C_NB_MAX_TAMPON];
+uint8_t I2C_tampon_reception[I2C_NB_MAX_TAMPON];
+uint16_t I2C_nb_a_envoyer, I2C_nb_a_recevoir;
+uint8_t adresse_7_bits;
+uint32_t i2c_error_code; // value of i2c->hw->tx_abrt_source if anything wrong happen, 0 if everything was fine.
+
+enum transaction_statu_t{
+    TRANSACTION_EN_COURS,
+    TRANSACTION_TERMINEE
+} statu_emission, statu_reception;
+
+void i2d_set_adresse_esclave(uint8_t _adresse_7bits);
+void i2c_charger_tampon_envoi(uint8_t* emission, uint16_t nb_envoi, uint16_t nb_reception);
+enum i2c_resultat_t i2c_transmission(uint8_t _adresse_7bits, uint8_t* emission, uint16_t nb_envoi, uint16_t nb_reception);
+
+void i2c_maitre_init(void){
+    //stdio_init_all();
+    i2c_init(i2c1, 100 * 1000);
+
+    printf("Initialisation des broches\n");
+    for(int i=0; i++; i<=28){
+        if(gpio_get_function(i) == GPIO_FUNC_I2C){
+            printf("Borche I2C : %d\n", i);
+            gpio_set_function(i, GPIO_FUNC_NULL);
+        }
+    }
+
+    printf("%d et %d en I2C\n", I2C1_SDA_PIN, I2C1_SCL_PIN);
+    gpio_set_function(I2C1_SDA_PIN, GPIO_FUNC_I2C);
+    gpio_set_function(I2C1_SCL_PIN, GPIO_FUNC_I2C);
+    gpio_pull_up(I2C1_SDA_PIN);
+    gpio_pull_up(I2C1_SCL_PIN);
+
+    i2c_statu_i2c1 = I2C_STATU_LIBRE;
+}
+
+/// @brief Fonction à appeler régulièrement ou en interruption.
+/// @param i2c 
+void i2c_gestion(i2c_inst_t *i2c){
+    // on veut gérer l'i2c avec cette fonction.
+    // 2 cas :
+    // - Soit écriture simple (plusieurs octets (W))
+    // - Soit écriture + lecture (Adresse (W), registre (W), données (R))
+    // Pour écrire 1 octet, i2c->hw->data_cmd = xxx, (avec CMD:8 à 0, ) 
+    // Pour lire 1 octet, i2c->hw->data_cmd = xxx (avec CMD:8 à 1)
+    // Il faut mettre CMD:9 à 1 pour le dernier octet.
+
+    // Envoi des données (ou des demandes de lecture)
+    static uint16_t index_envoi=0, index_reception=0;
+
+    // Acquitement des erreurs, pas 100% fonctionnel ! TODO !
+    if(i2c->hw->tx_abrt_source !=0){
+        // Seule solution trouvée pour réinitialiser l'I2C.
+        char a;
+        i2c_read_blocking(i2c, adresse_7_bits, &a, 1, false);
+
+        I2C_nb_a_envoyer = 0;
+        index_reception = 0;
+        I2C_nb_a_recevoir = 0;
+        statu_emission = TRANSACTION_TERMINEE;
+        statu_reception = TRANSACTION_TERMINEE;
+        i2c_statu_i2c1 = I2C_STATU_LIBRE;
+    }
+
+    while( (index_envoi < I2C_nb_a_envoyer) && (i2c_get_write_available(i2c)) ){
+        bool restart = false;
+        bool last = false;
+
+        if (index_envoi == 0){
+            // Début de l'envoi, assurons nous d'avoir la bonne adresse de l'esclave
+            i2c->hw->enable = 0;
+            i2c->hw->tar = adresse_7_bits;
+            i2c->hw->enable = 1;
+        }else{
+            // Passage de l'écriture à la lecture, on envoie un bit de restart.
+            if( !(I2C_tampon_envoi[index_envoi-1] & I2C_IC_DATA_CMD_CMD_BITS) && 
+                    (I2C_tampon_envoi[index_envoi] & I2C_IC_DATA_CMD_CMD_BITS)){
+                restart = true;
+            }
+        }
+
+        if(index_envoi + 1 == I2C_nb_a_envoyer){
+            // Fin de la trame, nous devons envoyer un bit de stop.
+            last = true;
+        }
+
+        i2c->hw->data_cmd =
+                I2C_tampon_envoi[index_envoi] |
+                bool_to_bit(restart) << I2C_IC_DATA_CMD_RESTART_LSB |
+                bool_to_bit(last) << I2C_IC_DATA_CMD_STOP_LSB;
+
+        if(last){
+            statu_emission = TRANSACTION_TERMINEE;
+            index_envoi = 0;
+            I2C_nb_a_envoyer = 0;
+            //printf("I2C emission terminee\n");
+        }else{
+            index_envoi++;
+        }
+        
+    }
+
+    // Réception des données - Lecture des données présentes dans le tampon
+    while( (index_reception < I2C_nb_a_recevoir) && (i2c_get_read_available(i2c)) ){
+        I2C_tampon_reception[index_reception] = (uint8_t) i2c->hw->data_cmd;
+        index_reception++;
+    }
+    if(index_reception == I2C_nb_a_recevoir){
+        statu_reception = TRANSACTION_TERMINEE;
+        index_reception = 0;
+        I2C_nb_a_recevoir = 0;
+    }
+
+    if(statu_reception == TRANSACTION_TERMINEE && statu_emission == TRANSACTION_TERMINEE){
+        i2c_statu_i2c1 = I2C_STATU_LIBRE;
+    }
+
+}
+
+/// @brief Charge le tampon d'émission pour pré-mâcher le travail à la fonction i2c_gestion
+/// @param emission 
+/// @param nb_envoi 
+/// @param nb_reception 
+void i2c_charger_tampon_envoi(uint8_t* emission, uint16_t nb_envoi, uint16_t nb_reception){
+    // Données à envoyer
+    for(unsigned int index=0; index<nb_envoi; index++){
+        I2C_tampon_envoi[index] = (uint16_t) emission[index];
+    }
+    // Données à lire
+    for(unsigned int index=0; index<nb_reception; index++){
+        I2C_tampon_envoi[nb_envoi + index] = (uint16_t) 0x0100;
+    }
+}
+
+/// @brief Stock l'adresse de l'esclave avec lequel communiquer
+/// @param _adresse_7bits 
+void i2d_set_adresse_esclave(uint8_t _adresse_7bits){
+    adresse_7_bits =_adresse_7bits;
+}
+
+/// @brief Initialise la transmission I2, sur l'i2c1. Une transmission se compose de 2 trames I2C, une pour écrire (Adresse + données), une pour lire
+/// Si nb_reception = 0, alors la trame pour lire ne sera pas envoyée.
+/// @param emission : données à envoyer
+/// @param nb_envoi : nombre de données à envoyer
+/// @param nb_reception : nombre de données à recevoir
+/// @return I2C_EN_COURS, I2C_SUCCES ou I2C_ECHEC
+enum i2c_resultat_t i2c_transmission(uint8_t _adresse_7bits, uint8_t* emission, uint16_t nb_envoi, uint16_t nb_reception){
+    static enum m_statu_t{
+        I2C_STATU_INIT,
+        I2C_STATU_EN_COURS,
+    }m_statu = I2C_STATU_INIT;
+
+    switch(m_statu){
+        case I2C_STATU_INIT:
+            // I2C libre ?
+            if(i2c_statu_i2c1 == I2C_STATU_OCCUPE){
+                return I2C_EN_COURS;
+            }
+            // Alors il est à nous !
+            i2c_statu_i2c1 = I2C_STATU_OCCUPE;
+            statu_emission = TRANSACTION_EN_COURS;
+            statu_reception = TRANSACTION_EN_COURS;
+            i2c_error_code = 0;
+
+            i2d_set_adresse_esclave(_adresse_7bits);
+
+            i2c_charger_tampon_envoi(emission, nb_envoi, nb_reception);
+            // Nous devons envoyer aussi une commande pour chaque octet à recevoir.
+            I2C_nb_a_envoyer = nb_envoi + nb_reception;
+            I2C_nb_a_recevoir = nb_reception;
+            
+            // On appelle la fonction gestion pour gagner du temps.
+            i2c_gestion(i2c1);
+            m_statu = I2C_STATU_EN_COURS;
+            break;
+
+        case I2C_STATU_EN_COURS:
+            if(i2c_statu_i2c1 == I2C_STATU_LIBRE){
+                m_statu = I2C_STATU_INIT;
+                if(i2c_error_code){
+                    return I2C_ECHEC;
+                }else{
+                    return I2C_SUCCES;
+                }
+                
+            }
+            break;
+    }
+    return I2C_EN_COURS;
+}
+
+/// @brief Lit le registre d'un composant se comportant comme une EPROM I2C.
+/// @return I2C_SUCCES, I2C_EN_COURS ou I2C_ECHEC
+enum i2c_resultat_t i2c_lire_registre_nb(uint8_t adresse_7_bits, uint8_t registre, uint8_t * reception, uint8_t len){
+    uint8_t emission[1];
+    emission[0] = registre;
+    enum i2c_resultat_t i2c_resultat;
+    i2c_resultat = i2c_transmission(adresse_7_bits, emission, 1, len);
+    if(i2c_resultat == I2C_SUCCES){
+        for(uint32_t i = 0; i < len; i++){
+            reception[i] = I2C_tampon_reception[i];
+        }
+        return I2C_SUCCES;
+    }else if(i2c_resultat == I2C_ECHEC){
+        return I2C_ECHEC;
+    }
+    return I2C_EN_COURS;   
+}
+
+/// @brief Initialise une transaction I2C. 
+/// Renvoie I2C_SUCCES si l'intégralité du message est chargé en envoi, 
+/// Renvoie I2C_EN_COURS si la fonction doit encore être appelée pour finir d'envoyer le message
+/// Renvoie I2C_ECHEC en cas d'erreur I2C.
+enum i2c_resultat_t i2c_ecrire_registre_nb(uint8_t adresse_7_bits, uint8_t registre, uint8_t * _emission, uint8_t len){
+    uint8_t emission[I2C_NB_MAX_TAMPON];
+    emission[0] = registre;
+    for(uint32_t i = 0; i < len; i++){
+        emission[i+1] = _emission[i];
+    }
+    enum i2c_resultat_t i2c_resultat;
+    return i2c_transmission(adresse_7_bits, emission, 1 + len, 0);
+    
+}
+
+
+/// @brief Pour l'instant bloquant, mais devrait passer en non bloquant bientôt => Non, voir i2c_lire_registre_nb
+/// @param adresse_7_bits 
+/// @param  
+/// @return I2C_SUCCES (1) ou I2C_ECHEC (2)
+int i2c_lire_registre(char adresse_7_bits, char registre, unsigned char * reception, char len){
+    int statu;
+    char emission[1];
+
+    emission[0] = registre;
+    statu = i2c_write_blocking (i2c1, adresse_7_bits, emission, 1, 0);
+    if(statu == PICO_ERROR_GENERIC){
+        printf("I2C - Envoi registre Echec\n");
+        return I2C_ECHEC;
+    }
+
+    statu = i2c_read_blocking (i2c1, adresse_7_bits, reception, len, 0);
+    if(statu == PICO_ERROR_GENERIC){
+        printf("I2C - Lecture registre Echec\n");
+        return I2C_ECHEC;
+    }
+
+    return I2C_SUCCES;
+}
+
+int i2c_ecrire_registre(char adresse_7_bits, char registre, char valeur_registre){
+    int statu;
+    char emission[2];
+
+    emission[0] = registre;
+    emission[1] = valeur_registre;
+    statu = i2c_write_blocking (i2c1, adresse_7_bits, emission, 2, 0);
+    if(statu == PICO_ERROR_GENERIC){
+        printf("Erreur ecrire registre\n");
+        return I2C_ECHEC;
+    }
+
+    printf("i2c Registre %x, valeur %x\n", registre, valeur_registre);
+
+    return I2C_SUCCES;
+}

i2c_maitre.h

@@ -0,0 +1,15 @@
+#include "pico/stdlib.h"
+#include "hardware/i2c.h"
+
+enum i2c_resultat_t {
+    I2C_EN_COURS,
+    I2C_SUCCES,
+    I2C_ECHEC
+};
+
+void i2c_maitre_init(void);
+void i2c_gestion(i2c_inst_t *i2c);
+enum i2c_resultat_t i2c_lire_registre_nb(uint8_t adresse_7_bits, uint8_t registre, uint8_t * reception, uint8_t len);
+enum i2c_resultat_t i2c_ecrire_registre_nb(uint8_t adresse_7_bits, uint8_t registre, uint8_t * _emission, uint8_t len);
+int i2c_ecrire_registre(char adresse_7_bits, char registre, char valeur_registre);
+int i2c_lire_registre(char adresse_7_bits, char registre, unsigned char * reception, char len);

i2c_slave.c

@@ -0,0 +1,108 @@
+/*
+ * Copyright (c) 2021 Valentin Milea <valentin.milea@gmail.com>
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#include "i2c_slave.h"
+#include "hardware/irq.h"
+
+typedef struct i2c_slave_t
+{
+    i2c_inst_t *i2c;
+    i2c_slave_handler_t handler;
+    bool transfer_in_progress;
+} i2c_slave_t;
+
+static i2c_slave_t i2c_slaves[2];
+
+static inline void finish_transfer(i2c_slave_t *slave) {
+    if (slave->transfer_in_progress) {
+        slave->handler(slave->i2c, I2C_SLAVE_FINISH);
+        slave->transfer_in_progress = false;
+    }
+}
+
+static void __not_in_flash_func(i2c_slave_irq_handler)(i2c_slave_t *slave) {
+    i2c_inst_t *i2c = slave->i2c;
+    i2c_hw_t *hw = i2c_get_hw(i2c);
+
+    uint32_t intr_stat = hw->intr_stat;
+    if (intr_stat == 0) {
+        return;
+    }
+    if (intr_stat & I2C_IC_INTR_STAT_R_TX_ABRT_BITS) {
+        hw->clr_tx_abrt;
+        finish_transfer(slave);
+    }
+    if (intr_stat & I2C_IC_INTR_STAT_R_START_DET_BITS) {
+        hw->clr_start_det;
+        finish_transfer(slave);
+    }
+    if (intr_stat & I2C_IC_INTR_STAT_R_STOP_DET_BITS) {
+        hw->clr_stop_det;
+        finish_transfer(slave);
+    }
+    if (intr_stat & I2C_IC_INTR_STAT_R_RX_FULL_BITS) {
+        slave->transfer_in_progress = true;
+        slave->handler(i2c, I2C_SLAVE_RECEIVE);
+    }
+    if (intr_stat & I2C_IC_INTR_STAT_R_RD_REQ_BITS) {
+        hw->clr_rd_req;
+        slave->transfer_in_progress = true;
+        slave->handler(i2c, I2C_SLAVE_REQUEST);
+    }
+}
+
+static void __not_in_flash_func(i2c0_slave_irq_handler)() {
+    i2c_slave_irq_handler(&i2c_slaves[0]);
+}
+
+static void __not_in_flash_func(i2c1_slave_irq_handler)() {
+    i2c_slave_irq_handler(&i2c_slaves[1]);
+}
+
+void i2c_slave_init(i2c_inst_t *i2c, uint8_t address, i2c_slave_handler_t handler) {
+    assert(i2c == i2c0 || i2c == i2c1);
+    assert(handler != NULL);
+
+    uint i2c_index = i2c_hw_index(i2c);
+    i2c_slave_t *slave = &i2c_slaves[i2c_index];
+    slave->i2c = i2c;
+    slave->handler = handler;
+
+    // Note: The I2C slave does clock stretching implicitly after a RD_REQ, while the Tx FIFO is empty.
+    // There is also an option to enable clock stretching while the Rx FIFO is full, but we leave it
+    // disabled since the Rx FIFO should never fill up (unless slave->handler() is way too slow).
+    i2c_set_slave_mode(i2c, true, address);
+
+    i2c_hw_t *hw = i2c_get_hw(i2c);
+    // unmask necessary interrupts
+    hw->intr_mask = I2C_IC_INTR_MASK_M_RX_FULL_BITS | I2C_IC_INTR_MASK_M_RD_REQ_BITS | I2C_IC_RAW_INTR_STAT_TX_ABRT_BITS | I2C_IC_INTR_MASK_M_STOP_DET_BITS | I2C_IC_INTR_MASK_M_START_DET_BITS;
+
+    // enable interrupt for current core
+    uint num = I2C0_IRQ + i2c_index;
+    irq_set_exclusive_handler(num, i2c_index == 0 ? i2c0_slave_irq_handler : i2c1_slave_irq_handler);
+    irq_set_enabled(num, true);
+}
+
+void i2c_slave_deinit(i2c_inst_t *i2c) {
+    assert(i2c == i2c0 || i2c == i2c1);
+
+    uint i2c_index = i2c_hw_index(i2c);
+    i2c_slave_t *slave = &i2c_slaves[i2c_index];
+    assert(slave->i2c == i2c); // should be called after i2c_slave_init()
+
+    slave->i2c = NULL;
+    slave->handler = NULL;
+    slave->transfer_in_progress = false;
+
+    uint num = I2C0_IRQ + i2c_index;
+    irq_set_enabled(num, false);
+    irq_remove_handler(num, i2c_index == 0 ? i2c0_slave_irq_handler : i2c1_slave_irq_handler);
+
+    i2c_hw_t *hw = i2c_get_hw(i2c);
+    hw->intr_mask = I2C_IC_INTR_MASK_RESET;
+
+    i2c_set_slave_mode(i2c, false, 0);
+}

i2c_slave.h

@@ -0,0 +1,66 @@
+/*
+ * Copyright (c) 2021 Valentin Milea <valentin.milea@gmail.com>
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#ifndef _I2C_SLAVE_H_
+#define _I2C_SLAVE_H_
+
+#include <hardware/i2c.h>
+#include <pico/stdlib.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \file i2c_slave.h
+ *
+ * \brief I2C slave setup.
+ */
+
+/**
+ * \brief I2C slave event types.
+ */
+typedef enum i2c_slave_event_t
+{
+    I2C_SLAVE_RECEIVE, /**< Data from master is available for reading. Slave must read from Rx FIFO. */
+    I2C_SLAVE_REQUEST, /**< Master is requesting data. Slave must write into Tx FIFO. */
+    I2C_SLAVE_FINISH, /**< Master has sent a Stop or Restart signal. Slave may prepare for the next transfer. */
+} i2c_slave_event_t;
+
+/**
+ * \brief I2C slave event handler
+ * 
+ * The event handler will run from the I2C ISR, so it should return quickly (under 25 us at 400 kb/s).
+ * Avoid blocking inside the handler and split large data transfers across multiple calls for best results.
+ * When sending data to master, up to `i2c_get_write_available()` bytes can be written without blocking.
+ * When receiving data from master, up to `i2c_get_read_available()` bytes can be read without blocking.
+ * 
+ * \param i2c Slave I2C instance.
+ * \param event Event type.
+ */
+typedef void (*i2c_slave_handler_t)(i2c_inst_t *i2c, i2c_slave_event_t event);
+
+/**
+ * \brief Configure I2C instance for slave mode.
+ * 
+ * \param i2c I2C instance.
+ * \param address 7-bit slave address.
+ * \param handler Called on events from I2C master. It will run from the I2C ISR, on the CPU core
+ *                where the slave was initialized.
+ */
+void i2c_slave_init(i2c_inst_t *i2c, uint8_t address, i2c_slave_handler_t handler);
+
+/**
+ * \brief Restore I2C instance to master mode.
+ *
+ * \param i2c I2C instance.
+ */
+void i2c_slave_deinit(i2c_inst_t *i2c);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // _I2C_SLAVE_H_

main.c

@@ -3,17 +3,22 @@
  *
  * SPDX-License-Identifier: BSD-3-Clause
 */
+#include "communication.h"
 #include "pico/stdlib.h"
 #include "hardware/pwm.h"
 #include <stdio.h>
 #include "hardware/adc.h"
 #define LED_VERTE 25
 #define PIN_VITESSE_M1 2
-#define PIN_SENS_A_M1 0                                                                                                                     
+#define PIN_SENS_A_M1 0
 #define PIN_SENS_B_M1 1
 
-uint16_t result1 = 0;
+int result0, result1;
-uint16_t result0 = 0;
+int joystic_clicker;
+int pince;
+int ascenceur;
+
+
 int M1_INITIALISE()
 {
 	gpio_init(PIN_VITESSE_M1);
@@ -71,7 +76,7 @@ int AdcRead0()
 int AdcRead1()
 {
 	adc_select_input(1);
-	uint16_t resultadc= adc_read();
+	uint16_t resultadc = adc_read();
 	return resultadc;
 }
 
@@ -82,8 +87,16 @@ int AdcRead1()
 
 void main()
 {
+	char message [256];
 	stdio_init_all();
 
+	// Communication
+	communication_init();
+
+	// Pour envoyer un message
+	// communication_envoyer_message(message, 254);
+
+
 	// CLignottement LED
 	gpio_set_function(LED_VERTE, GPIO_FUNC_PWM);
 	pwm_set_wrap(4, 100);
@@ -97,20 +110,57 @@ void main()
 	
 	while (1) 
 	{
-		// Voie Y
-		result0 = AdcRead0();
-		printf(">result:%d\n",result0-2048);
-
 		// Voie X
 		result1 = AdcRead1();
-	 	printf(">result1:%d\n",result1-2048);
+	 	
-		printf("test\n",result0);
+		message[0] = result1/16;
+		
+		// Voie Y
+		result0 = AdcRead0();
+		
+		message[1] = result0/16;
+		
+		//clic sur le joystic
+		gpio_init(1);
+		gpio_pull_up(1);
+    	gpio_set_dir(1, GPIO_IN);
+		joystic_clicker = gpio_get(1);
+		if (!joystic_clicker)
+		{
+			message[2] = result1/16;
+			message[1] = 128;
+			message[0] = 128;
+		}
+		else
+		{
+			message[2] = 128;
+		}
 
+
+
+		//pince
+		gpio_init(2);
+		gpio_set_dir(2, GPIO_IN);
+		gpio_pull_up(2);
+		pince = gpio_get(2);
+		message [3] = pince;
+
+		gpio_init(6);
+		gpio_set_dir(6, GPIO_IN);
+		gpio_pull_up(6);
+		ascenceur = gpio_get(6);
+		message[4] = ascenceur;
+
+
+		printf(">x:%d\n", message[0]);
+		printf(">Y:%d\n", message[1]);
+		printf(">Rz:%d\n", message[2]);
+		printf(">pince:%d\n", message[3]);
+		printf(">ascenceur:%d\n", message[4]);
 		sleep_ms(100);
-
+		communication_envoyer_message(message, 254);
 	}
 	M1_INITIALISE();
-
 	while(1)
 	{
 		M1_AVANCE();
@@ -120,4 +170,4 @@ void main()
 	
 	}
 
-}
+}