Keuronde/LogEtComUSB
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
e2d49bac4f
LogEtComUSB/lib/sd_driver/SPI/my_spi.c

372 lines
14 KiB
C
Executable File
Raw Blame History

/* spi.c
Copyright 2021 Carl John Kugler III
Licensed under the Apache License, Version 2.0 (the License); you may not use
this file except in compliance with the License. You may obtain a copy of the
License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed
under the License is distributed on an AS IS BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
*/
#include <stdbool.h>
#include <stdint.h>
#include <stdio.h>
//
#include "hardware/clocks.h"
#include "hardware/spi.h"
#include "hardware/structs/clocks.h"
//#include "hardware/structs/dma_debug.h"
#include "pico.h"
#include "pico/mutex.h"
#include "pico/platform.h"
#include "pico/stdlib.h"
//
#include "delays.h"
#include "hw_config.h"
#include "my_debug.h"
#include "util.h"
//
#include "my_spi.h"
#ifndef USE_DBG_PRINTF
#pragma GCC diagnostic ignored "-Wunused-variable"
#endif
static bool chk_spi(spi_t *spi_p) {
spi_inst_t *hw_spi = spi_p->hw_inst;
bool ok = true;
if (spi_get_const_hw(hw_spi)->sr & SPI_SSPSR_BSY_BITS) {
DBG_PRINTF("SPI is busy\n");
ok = false;
}
if (spi_get_const_hw(hw_spi)->sr & SPI_SSPSR_RFF_BITS) {
DBG_PRINTF("SPI Receive FIFO full\n");
ok = false;
}
if (spi_get_const_hw(hw_spi)->sr & SPI_SSPSR_RNE_BITS) {
DBG_PRINTF("SPI Receive FIFO not empty\n");
ok = false;
}
if (!(spi_get_const_hw(hw_spi)->sr & SPI_SSPSR_TNF_BITS)) {
DBG_PRINTF("SPI Transmit FIFO is full\n");
ok = false;
}
if (!(spi_get_const_hw(hw_spi)->sr & SPI_SSPSR_TFE_BITS)) {
DBG_PRINTF("SPI Transmit FIFO is not empty\n");
ok = false;
}
return ok;
}
static bool chk_dma(uint chn) {
dma_channel_hw_t *channel = &dma_hw->ch[chn];
bool ok = true;
uint32_t ctrl = channel->ctrl_trig;
if (ctrl & DMA_CH0_CTRL_TRIG_AHB_ERROR_BITS) {
DBG_PRINTF("\tDMA bus error\n");
ok = false;
}
if (ctrl & DMA_CH0_CTRL_TRIG_READ_ERROR_BITS) {
DBG_PRINTF("\tDMA read error\n");
ok = false;
}
if (ctrl & DMA_CH0_CTRL_TRIG_WRITE_ERROR_BITS) {
DBG_PRINTF("\tDMA write error\n");
ok = false;
}
if (ctrl & DMA_CH0_CTRL_TRIG_BUSY_BITS) {
DBG_PRINTF("\tDMA is busy\n");
ok = false;
}
//if (!ok) {
// dma_debug_channel_hw_t *dbg_ch_p = &dma_debug_hw->ch[chn];
// DBG_PRINTF("\tTRANSFER_COUNT: %lu\n", channel->transfer_count);
// DBG_PRINTF("\tTRANS_COUNT reload value (DBG_TCR): %lu\n", dbg_ch_p->dbg_tcr);
// DBG_PRINTF("\tDREQ counter: %lu\n", dbg_ch_p->dbg_ctdreq);
//}
return ok;
}
static bool chk_dmas(spi_t *spi_p) {
bool tx_ok = chk_dma(spi_p->tx_dma);
if (!tx_ok) DBG_PRINTF("TX DMA error\n");
bool rx_ok = chk_dma(spi_p->rx_dma);
if (!rx_ok) DBG_PRINTF("RX DMA error\n");
return tx_ok && rx_ok;
}
/**
* @brief Start a SPI transfer by configuring and starting the DMA channels.
*
* @param spi_p Pointer to the SPI object.
* @param tx Pointer to the transmit buffer. If NULL, data will be filled with SPI_FILL_CHAR.
* @param rx Pointer to the receive buffer. If NULL, data will be ignored.
* @param length Length of the transfer.
*/
void spi_transfer_start(spi_t *spi_p, const uint8_t *tx, uint8_t *rx, size_t length) {
myASSERT(spi_p);
myASSERT(tx || rx);
// tx write increment is already false
if (tx) {
channel_config_set_read_increment(&spi_p->tx_dma_cfg, true);
} else {
static const uint8_t dummy __attribute__((section(".time_critical."))) = SPI_FILL_CHAR;
tx = &dummy;
channel_config_set_read_increment(&spi_p->tx_dma_cfg, false);
}
// rx read increment is already false
if (rx) {
channel_config_set_write_increment(&spi_p->rx_dma_cfg, true);
} else {
static uint8_t dummy = 0xA5;
rx = &dummy;
channel_config_set_write_increment(&spi_p->rx_dma_cfg, false);
}
dma_channel_configure(spi_p->tx_dma, &spi_p->tx_dma_cfg,
&spi_get_hw(spi_p->hw_inst)->dr, // write address
tx, // read address
length, // element count (each element is of
// size transfer_data_size)
false); // start
dma_channel_configure(spi_p->rx_dma, &spi_p->rx_dma_cfg,
rx, // write address
&spi_get_hw(spi_p->hw_inst)->dr, // read address
length, // element count (each element is of
// size transfer_data_size)
false); // start
myASSERT(chk_dmas(spi_p));
myASSERT(chk_spi(spi_p));
// Start the DMA channels:
// start them exactly simultaneously to avoid races (in extreme cases
// the FIFO could overflow)
dma_start_channel_mask((1u << spi_p->tx_dma) | (1u << spi_p->rx_dma));
}
/**
* Calculate the time in milliseconds to transfer the given number of blocks
* over the SPI bus at the given baud rate.
* @param block_count The number of blocks to transfer, each 512 bytes.
* @param spi_p Pointer to the SPI object.
* @return The time in milliseconds to transfer the given number of blocks.
*/
uint32_t calculate_transfer_time_ms(spi_t *spi_p, uint32_t bytes) {
// Calculate the total number of bits to transfer
uint32_t total_bits = bytes * 8;
// Get the baud rate from the SPI interface
uint32_t baud_rate = spi_get_baudrate(spi_p->hw_inst);
// Calculate the time to transfer all bits in seconds
float transfer_time_sec = (double)total_bits / baud_rate;
// Convert the time to milliseconds
float transfer_time_ms = transfer_time_sec * 1000;
transfer_time_ms *= 1.5f; // Add 50% for overhead
transfer_time_ms += 4.0f; // For fixed overhead
return (uint32_t)transfer_time_ms;
}
/**
* @brief Wait until SPI transfer is complete.
* @details This function waits until the SPI master completes the transfer
* or a timeout has occurred. The timeout is specified in milliseconds.
* If the timeout is reached the function will return false.
* This function uses busy waiting to check for completion of the transfer.
*
* @param spi_p The SPI configuration.
* @param timeout_ms The timeout in milliseconds.
* @return true if the transfer is complete, false if the timeout is reached.
*/
bool __not_in_flash_func(spi_transfer_wait_complete)(spi_t *spi_p, uint32_t timeout_ms) {
myASSERT(spi_p);
bool timed_out = false;
// Record the start time in milliseconds
uint32_t start = millis();
// Wait until DMA channels are not busy or timeout is reached
while ((dma_channel_is_busy(spi_p->rx_dma) || dma_channel_is_busy(spi_p->tx_dma)) &&
millis() - start < timeout_ms)
tight_loop_contents();
// Check if the DMA channels are still busy
timed_out = dma_channel_is_busy(spi_p->rx_dma) || dma_channel_is_busy(spi_p->tx_dma);
// Print debug information if the DMA channels are still busy
if (timed_out) {
DBG_PRINTF("DMA busy wait timed out in %s\n", __FUNCTION__);
} else {
// If the DMA channels are not busy, wait for the SPI peripheral to become idle
start = millis();
while (spi_is_busy(spi_p->hw_inst) && millis() - start < timeout_ms)
tight_loop_contents();
// Check if the SPI peripheral is still busy
timed_out = spi_is_busy(spi_p->hw_inst);
// Print debug information if the SPI peripheral is still busy
if (timed_out) {
DBG_PRINTF("SPI busy wait timed out in %s\n", __FUNCTION__);
}
}
// Check the status of the SPI peripheral
bool spi_ok = chk_spi(spi_p);
if (timed_out || !spi_ok) {
chk_dmas(spi_p);
DBG_PRINTF("DMA_INTR: 0b%s\n", uint_binary_str(dma_hw->intr));
DBG_PRINTF("TX DMA CTRL_TRIG: 0b%s\n",
uint_binary_str(dma_hw->ch[spi_p->tx_dma].ctrl_trig));
DBG_PRINTF("RX DMA CTRL_TRIG: 0b%s\n",
uint_binary_str(dma_hw->ch[spi_p->rx_dma].ctrl_trig));
DBG_PRINTF("SPI SSPCR0: 0b%s\n", uint_binary_str(spi_get_hw(spi_p->hw_inst)->cr0));
DBG_PRINTF("SPI SSPCR1: 0b%s\n", uint_binary_str(spi_get_hw(spi_p->hw_inst)->cr1));
DBG_PRINTF("SPI_SSPSR: 0b%s\n", uint_binary_str(spi_get_const_hw(spi_p->hw_inst)->sr));
DBG_PRINTF("SPI_SSPDMACR: 0b%s\n",
uint_binary_str(spi_get_const_hw(spi_p->hw_inst)->dmacr));
dma_channel_abort(spi_p->rx_dma);
dma_channel_abort(spi_p->tx_dma);
}
// Return true if the transfer is complete and the SPI peripheral is in a good state
return !(timed_out || !spi_ok);
}
/**
* SPI Transfer: Read & Write (simultaneously) on SPI bus
* @param spi_p Pointer to the SPI object.
* @param tx Pointer to the transmit buffer. If NULL, SPI_FILL_CHAR is sent as each data
* element.
* @param rx Pointer to the receive buffer. If NULL, data is ignored.
* @param length Number of data elements to transfer.
* @return true if the transfer is completed successfully within the timeout.
* @return false if the transfer times out or encounters an error.
*/
bool __not_in_flash_func(spi_transfer)(spi_t *spi_p, const uint8_t *tx, uint8_t *rx,
size_t length) {
spi_transfer_start(spi_p, tx, rx, length);
// Related to timeouts in spi_lock and sd_lock
uint32_t timeout = calculate_transfer_time_ms(spi_p, length);
return spi_transfer_wait_complete(spi_p, timeout);
}
/**
* @brief Initialize the SPI peripheral and DMA channels.
*
* @param spi_p Pointer to the SPI object.
* @return true if the initialization is successful, false otherwise.
*/
bool my_spi_init(spi_t *spi_p) {
auto_init_mutex(my_spi_init_mutex);
mutex_enter_blocking(&my_spi_init_mutex);
if (!spi_p->initialized) {
//// The SPI may be shared (using multiple SSs); protect it
if (!mutex_is_initialized(&spi_p->mutex)) mutex_init(&spi_p->mutex);
spi_lock(spi_p);
// Defaults:
if (!spi_p->hw_inst) spi_p->hw_inst = spi0;
if (!spi_p->baud_rate) spi_p->baud_rate = clock_get_hz(clk_sys) / 12;
/* Configure component */
// Enable SPI at 100 kHz and connect to GPIOs
spi_init(spi_p->hw_inst, 100 * 1000);
myASSERT(spi_p->spi_mode < 4);
switch (spi_p->spi_mode) {
case 0:
spi_set_format(spi_p->hw_inst, 8, SPI_CPOL_0, SPI_CPHA_0, SPI_MSB_FIRST);
break;
case 1:
spi_set_format(spi_p->hw_inst, 8, SPI_CPOL_0, SPI_CPHA_1, SPI_MSB_FIRST);
break;
case 2:
spi_set_format(spi_p->hw_inst, 8, SPI_CPOL_1, SPI_CPHA_0, SPI_MSB_FIRST);
break;
case 3:
spi_set_format(spi_p->hw_inst, 8, SPI_CPOL_1, SPI_CPHA_1, SPI_MSB_FIRST);
break;
default:
spi_set_format(spi_p->hw_inst, 8, SPI_CPOL_0, SPI_CPHA_0, SPI_MSB_FIRST);
break;
}
gpio_set_function(spi_p->miso_gpio, GPIO_FUNC_SPI);
gpio_set_function(spi_p->mosi_gpio, GPIO_FUNC_SPI);
gpio_set_function(spi_p->sck_gpio, GPIO_FUNC_SPI);
// ss_gpio is initialized in sd_spi_ctor()
// Slew rate limiting levels for GPIO outputs.
// enum gpio_slew_rate { GPIO_SLEW_RATE_SLOW = 0, GPIO_SLEW_RATE_FAST = 1 }
// void gpio_set_slew_rate (uint gpio,enum gpio_slew_rate slew)
// Default appears to be GPIO_SLEW_RATE_SLOW.
gpio_set_slew_rate(spi_p->sck_gpio, GPIO_SLEW_RATE_FAST);
/* Drive strength levels for GPIO outputs:
enum gpio_drive_strength {
GPIO_DRIVE_STRENGTH_2MA = 0,
GPIO_DRIVE_STRENGTH_4MA = 1,
GPIO_DRIVE_STRENGTH_8MA = 2,
GPIO_DRIVE_STRENGTH_12MA = 3 }
enum gpio_drive_strength gpio_get_drive_strength (uint gpio)
*/
if (spi_p->set_drive_strength) {
gpio_set_drive_strength(spi_p->mosi_gpio, spi_p->mosi_gpio_drive_strength);
gpio_set_drive_strength(spi_p->sck_gpio, spi_p->sck_gpio_drive_strength);
}
// SD cards' DO MUST be pulled up. However, it might be done externally.
if (!spi_p->no_miso_gpio_pull_up) gpio_pull_up(spi_p->miso_gpio);
// gpio_set_input_hysteresis_enabled(spi_p->miso_gpio, false);
// Check if the user has provided DMA channels
if (spi_p->use_static_dma_channels) {
// Claim the channels provided
dma_channel_claim(spi_p->tx_dma);
dma_channel_claim(spi_p->rx_dma);
} else {
// Grab some unused dma channels
spi_p->tx_dma = dma_claim_unused_channel(true);
spi_p->rx_dma = dma_claim_unused_channel(true);
}
spi_p->tx_dma_cfg = dma_channel_get_default_config(spi_p->tx_dma);
spi_p->rx_dma_cfg = dma_channel_get_default_config(spi_p->rx_dma);
channel_config_set_transfer_data_size(&spi_p->tx_dma_cfg, DMA_SIZE_8);
channel_config_set_transfer_data_size(&spi_p->rx_dma_cfg, DMA_SIZE_8);
// We set the outbound DMA to transfer from a memory buffer to the SPI
// transmit FIFO paced by the SPI TX FIFO DREQ The default is for the
// read address to increment every element (in this case 1 byte -
// DMA_SIZE_8) and for the write address to remain unchanged.
channel_config_set_dreq(&spi_p->tx_dma_cfg, spi_get_dreq(spi_p->hw_inst, true));
channel_config_set_write_increment(&spi_p->tx_dma_cfg, false);
// We set the inbound DMA to transfer from the SPI receive FIFO to a
// memory buffer paced by the SPI RX FIFO DREQ We configure the read
// address to remain unchanged for each element, but the write address
// to increment (so data is written throughout the buffer)
channel_config_set_dreq(&spi_p->rx_dma_cfg, spi_get_dreq(spi_p->hw_inst, false));
channel_config_set_read_increment(&spi_p->rx_dma_cfg, false);
LED_INIT();
spi_p->initialized = true;
spi_unlock(spi_p);
}
mutex_exit(&my_spi_init_mutex);
return true;
}
/* [] END OF FILE */
Reference in New Issue View Git Blame Copy Permalink